€640.54
Priemerné hodnotenie:0/5(0x)
Vlastnosti a parametre výrobku
Skúsenosti užívateľov
Otázky a odpovede
Dokumentácia
Popis
Vlastnosti a parametre výrobku
Vlastnosti monitorovacieho zariadenia | So senzorom pohybu Záznam na pamäťovú kartu S IR LED S mikrofónom S prevádzkou na batérie / akumulátor |
---|---|
Standard přenosu signálu | IP |
Druh senzora (zabezpečenie) | CMOS |
prenos | Wi-Fi |
Wi-Fi štandard | IEEE802.11n |
Miesto použitia | Vonkajšia |
max.dosah IR svetla | 7 m |
Horizontálny zorný uhol | 130 ° |
Frekvencia | 2.4 GHz |
Farba | Biela |
Kategória výrobku | Sada bezpečnostné kamery |
Cloudová integrácia (Smart Home) | Conrad Connect (CONRAD-CONNECT_SY_01) |
Rozlíšenie (max.) | 1280 x 720 px |
Ovládanie pomocou aplikácie pre smartphone | Áno |
Skúsenosti a názory zákazníkov
- Skúsenosti užívateľov nie sú k dispozícii.
Otázky užívateľov
- Užívatelia k tomuto výrobku zatiaľ nemali žiadne otázky.
Dokumentácia
Podmienky používania dokumentácie
Arlo Pro Wire-Free HD Security Camera System User Manual July 2017
N
350 East Plumeria Driv San Jose202-11683-04
2
Support For product updates and web support, visit http://www.arlo.com/en-us/support/.
Trademarks © NETGEAR, Inc., NETGEAR and the NETGEAR Logo are trademarks of NETGEAR, Inc. Any non-NETGEAR trademarks are used for reference purposes only.
Compliance For the current EU Declaration of Conformity, visit http://support.netgear.com/app/answers/detail/a_id/11621/.
For regulatory compliance information, visit http://www.netgear.com/about/regulatory/.
See the regulatory compliance document before connecting the power supply.
3
Contents 1. Set Up Your System 7
Insert the Battery Into Your Camera …7
Get the Arlo App …8
Connect Your Base Station to the Internet …8
Arlo Base Station LEDs …9
Arlo Pro Camera LED …10
Add an Arlo Pro Camera to an Existing Arlo Account …12
Sync Your Cameras With the Base Station …12
Arlo Pro Firmware Updates …13
Place or Mount Your Cameras …13
Position Your Cameras …14
Position Mode …16
Recharge Your Arlo Pro Battery …16
Add a Camera From Another Arlo Account …17
2. View Your Content 19
View the Devices Page …19
View Camera Feeds …20
Pan and Zoom Video …20
Record Clips From Live Video …21
Take a Snapshot From Live Video …21
Talk and Listen …22
Control the Camera Feed Image …22
Cloud Recording …24
View Recordings and Snapshots …25
Share and Manage Library Recordings …27
4
3. USB Device Storage With Arlo Pro 30
Connect a USB Storage Device …30
View the USB Storage Device Status …31
Safely Eject and Remove a USB Storage Device …31
View Video Clips on a USB Storage Device …33
Change the USB Storage Device Overwrite Setting …33
Format a USB Storage Device …34
Turn on Recording for a USB Storage Device …35
Stop Recording Onto a USB Storage Device …36
4. Personalize Your System 37
Name Your Camera …37
Profile Settings …37
Grant Access to Friends …39
5. Modes, Rules, and Smart Alerts 42
Modes …42
Rules …
43
Select a Mode …43
Change Motion Sensitivity …45
Automatically Stop Recording When Motion Stops …46
Change Audio Sensitivity …46
Add a Rule That Includes a Siren Trigger …47
Manage Alerts …48
Set Up Geofencing …49
Geofencing With Multipe Mobile Devices …50
Geofencing Accuracy …51
Geofencing First In, Last Out …52
Schedule Your Camera Rules …52
Add a Mode …55
Add a Mode With Different Rules for Each Camera …56
5
6. Settings 59
Turn the Arlo App Fingerprint ID Login On and Off …59
Change the Time Zone …59
Camera Settings …60
Audio Settings …62
Base Station Settings …64
View Device Information …68
Restart the Camera…68
Remove a Camera From Your Account …69
7. Manage Your Subscription Plan 70
Subscription Plans …70
Renew Your Service Plan …70
Upgrade Your Subscription to a Retail or Business Plan …70
8. Arlo Connect 72
Use Arlo With IFTTT …72
Use Arlo Cameras With SmartThings …72
Use Arlo With Stringify …72
9. Use SmartThings With Arlo Cameras 74
Prepare Arlo to Work With SmartThings …74
Integrate Your Arlo Cameras With the SmartThings App …75
Adjust the Motion Sensitivity Level …77
Adjust Push Notifications …78
10. FAQs and Troubleshooting 79
Battery FAQs …79
Manage Bandwidth for Streaming …80
Can’t See Video Streams in a Browser …81
Not Receiving Push Notifications …82
Verify That the Arlo Base Station Is Online …84
6
Base Station Is Offline …84
Signal Strength …86
Reset the Arlo Base Station to Factory Settings …87
11. Rechargeable Battery Safety 88
Safety Rules for Arlo Pro Rechargeable Batteries …88
Safety Rules for Arlo Pro Charging Station …89
7
1. Set Up Your System Setting up your Arlo Pro system involves these steps: – Insert the battery into your camera.
– Get the Arlo app.
– Connect your base station.
– Get an account.
– Sync your cameras to the base station.
– Place your cameras.
Insert the Battery Into Your Camera ¾To insert the battery into your camera: 1. Unlock the battery compartment by pressing and holding the latch.
2. Gently pull the battery door back to open the compartment.
3. Align the battery contacts.
4. Insert the battery.
5. Close the battery door.
Note: The Arlo Pro battery is fully charged when it leaves the factory.
For more information, see Safety Rules for Arlo Pro Rechargeable Batteries on page 83.
8
Set Up Your System Get the Arlo App For the best experience, download the Arlo app for your smartphone by scanning this QR code or searching for Arlo in the app store.
Note: If you already use the Arlo app, make sure that you are using the latest version. To find out if an update is available, go to the app store and search for Arlo.
Connect Your Base Station to the Internet The base station connects to your home network and allows you to view your camera streams from anywhere.
¾To connect your base station to the Internet: 1. Connect the base station to your router using an Ethernet cable.
2. Connect the AC adapter to the base station and plug it in.
https://arlo.netgear.com
9
Set Up Your System 3. Turn the base station on by pressing the On/Off button.
The Power LED and Internet LED on the front of the base station light green in about two minutes.
Your base station is set up.
Arlo Base Station LEDs See the following list for explanations for green, amber, and blinking LEDs: Green The base station is powered on.
Blinking green A firmware update is in progress. DO
NOT TURN OFF THE
BASE STATION OR
CAMERAS.
Off The base station is powered off.
Green The base station is connected to the Internet.
Amber The base station is connected to the router but did not get an Internet connection.
Off The base station is not connected to your router.
Green Cameras are connected to the base station.
Blinking green The base station is attempting to sync with a camera.
Blinking amber A camera is too far from the base station. Signal strength is weak.
Off No cameras are detected.
Amber The base station is booting.
PowerInternetCamera
10
Set Up Your System Arlo Pro Camera LED
The LED on the camera lights when the camera is powered on. The LED changes color and blinks depending on the battery charge and to indicate the status of activities such as syncing the camera and updating the camera firmware.
See the following table for explanations for the Camera LED.
Camera LED
Color and ActionMeaning Solid blueThe camera is connected to the Quick Charge 9v power adapter and is fully charged.
Fast blinking blue for 3
seconds The camera is connected to the Quick Charge 9v power adapter and is charging.
Fast blinking blue for 10
seconds The camera synced to the base station.
Solid amber The camera is booting.
Blinking amber once per minute Low battery (15% or less) Fast blinking amber for 3
seconds The camera is not charging. It is connected to a 5v charger instead of the Quick Charge 9v power adapter that came in the package with the camera.
Fast blinking amber for 10
seconds The camera failed to sync to the base station.
Blinking blue and amberA firmware update is in progress. DO NOT TURN OFF THE
CAMERA.
11
Set Up Your System Get an Account ¾To set up an Arlo account: 1. Tap the Arlo icon on your mobile device.
If you are using a computer, enter arlo.netgear.com in the address bar of a browser.
If you are using a mobile device that supports Touch ID®, you are prompted to enable Touch ID or skip.
2. To use Touch ID, tap Enable Touch ID.
If you tap Skip, you can turn on the Arlo app fingerprint ID login later. See Turn the Arlo App Fingerprint ID Login On and Off on page 55.
3. Tap or click New to Arlo?.
4. Select Arlo (Wire-Free).
5. After the app discovers your device, select your base station’s serial number from the menu.
6. Select your time zone from the menu.
7. Tap or click Continue.
8. Complete the required fields for account setup.
9. Tap or click Continue.
10. Select a subscription plan.
Note: For more information, see Subscription Plans on page 66.
Your Arlo account is set up. The Basic subscription plan supports up to five synced cameras. You can upgrade to a paid subscription plan to support more cameras.
12
Set Up Your System Add an Arlo Pro Camera to an Existing Arlo Account ¾To add an Arlo Pro camera to an existing Arlo account: 1. Tap the Arlo icon on your mobile device.
If you are using a computer, enter arlo.netgear.com in the address bar of a browser.
2. Tap or click Add Device.
3. Follow the onscreen instructions.
Sync Your Cameras With the Base Station ¾To sync your cameras: 1. Place the camera one to three feet (30 –100 centimeters) of the base station.
Note: Cameras must be synced one at a time.
2. Press the Sync button on the top of the base station for about two seconds and then release the button.
3. Wait for the Sync status LED to blink green.
4. Press the Sync button on top of the camera for about two seconds and then release the button.
13
Set Up Your System The LED on the camera LED lights blue and blinks rapidly to confirm syncing.
The camera is ready for viewing.
The LED lights amber and blinks rapidly for 10 seconds if the sync is not successful. You must repeat the sync process.
5. Repeat for each camera.
Arlo Pro Firmware Updates During initial setup, when you add the base station to your Arlo account, the Arlo Pro system checks for firmware updates. After you sync the first Arlo Pro Camera, if firmware updates are available, your devices automatically update.
After a base station firmware update, the base station reboots and connects to the Internet.
When a camera firmware update is in progress, the LED on the camera blinks alternating blue and amber. After this, the LED is off for one to two minutes while the camera installs the firmware.
Important: Do not open the battery door while the camera is updating and installing firmware. After the camera firmware update completes, the camera syncs to the base station again and the camera LED blinks blue rapidly for 10 seconds.
Place or Mount Your Cameras You can place your camera on a shelf or other flat surface, or you can mount it to the wall.
Note: Use the Arlo app in Position mode to help aim the camera. See Position Mode on page 16.
14
Set Up Your System ¾To mount your camera to the wall: 1. Fasten the mounting screw into the wall, and hang the magnetic mount from the screw.
2. If you’re mounting the camera to drywall, be sure to use the plastic drywall anchors that are provided.
Note: You can also use double-sided tape instead of screws.
Position Your Cameras Arlo’s Position mode allows you to see what your camera sees. Using Position mode, you can make sure that your Arlo camera is positioned to monitor the precise area that you want. For more information, see Position Mode on page 16.
It’s important to keep distance in mind when placing your Arlo cameras: – Maximum. You can place your Arlo camera a maximum of 300 feet (90 meters) from the base station. In indoor installations, the range might be less if metal objects or thick walls and ceilings are between a camera and the base station.
Note: Check the Camera LED on the base station. If it’s blinking amber, the base station detects a low data rate, a sign that a camera is too far from the base station.
– Minimum. Place your Arlo cameras at one to three feet (30 –100 centimeters) away from the base station, and allow at least 6½ feet (2 meters) between cameras. Follow these guidelines to prevent WiFi signals between the devices from interfering with each other.
15
Set Up Your System When positioning your Arlo camera, keep these tips in mind: – Keep active locations in the camera’s field of view. Your Arlo camera provides a 130-degree viewing angle. Position your camera so that the space that you want to monitor is within the camera’s field of view.
– Aim with the cloud. Use Arlo’s Position mode to send video to the cloud as quickly as possible. This allows you to aim the camera while watching the video feed on your Arlo smartphone app to make near real-time adjustments to the camera’s position. Go to your camera’s Settings to turn on Position mode. After the camera is in place, you can turn off Position mode, or it automatically turns off after five minutes. For more information, see Position Mode on page 16.
– Elevate your camera. Mount your Arlo motion-detection camera at least 7
feet (2 meters) above the floor and aim it slightly downward for the best sensor performance.
– Ensure that side-to-side traffic crosses Arlo’s field of view. Arlo’s motion sensor is much more sensitive to side-to-side movement across its field of view than to movement directly toward or away from the camera. The best area for motion detection is 5 feet to 20 feet (1.5 to 6 meters) from the camera position.
For best results, position the camera so that the path of expected motion crosses Arlo’s field of view and does not head directly into or away from the camera. For example, if you want to detect motion near a couch, place the camera to the side of the couch, rather than above it or opposite it.
You can use the Motion Detection Test to verify if motion can be detected in a camera’s current placement. The camera’s LED flashes amber when motion is detected. Go to your camera’s Settings to turn on the Motion Detection Test.
16
Set Up Your System Position Mode Position mode is available only when the camera is not streaming, recording motion, or in Motion Detection mode.
¾To place your camera in Position mode: 1. Tap the Arlo icon on your mobile device.
If you are using a computer, enter arlo.netgear.com in the address bar of a browser.
If you are using a mobile device that supports Touch ID, you are prompted to enable Touch ID or skip.
2. Tap or click Settings.
The Settings page displays.
3. Under Camera Settings, select the camera to position.
4. Tap or click Position Mode.
The camera starts streaming video.
Note: In Position mode, the camera streams video as fast as possible, without buffering, so that you can aim the camera while watching on a smartphone and make near real-time adjustments to the camera position. This means that you might see lower-quality video while the camera is in Position mode.
Recharge Your Arlo Pro Battery The Arlo Pro battery is fully charged when it leaves the factory.
¾To recharge the battery: 1. Place the camera indoors.
If you are using the camera outside, bring it inside while charging the battery.
2. Connect the power adapter cable to the camera power adapter.
Note: You must use an Arlo Pro power adapter to charge the battery.
17
Set Up Your System 3. Connect the other end of the adapter cable to the camera.
4. Plug the power adapter into an electrical outlet.
The camera LED lights solid blue when the camera battery is fully charged.
Note: You can buy spare Arlo Pro rechargeable batteries and charge them in the Arlo Charging Station (sold separately). For uninterrupted Arlo Pro camera use, we recommend that you keep a fully charged spare battery on hand.
Add a Camera From Another Arlo Account ¾To add a camera from another Arlo account: 1. Tap the Arlo icon on your mobile device.
If you are using a computer, enter arlo.netgear.com in the address bar of a browser.
The Devices page displays.
2. Log in to the old Arlo account.
3. Tap or click Settings.
The Settings page displays.
4. Tap or click My Devices.
A list of cameras displays.
5. Tap or click the camera.
18
Set Up Your System The settings for the camera display.
6. Scroll down and Tap or click Remove Device.
The camera is removed from your account.
7. Log out of the Arlo app.
8. Sync the camera to the base station.
19
2. View Your Content Videos recorded by your camera are stored in a library. You can view your recordings and snapshots, mark them as favorites, and search using the filter.
View the Devices Page When you launch the Arlo app, the Devices page displays.
Live Feed Icon Tap or click Live to displayCamera IconDisplay is based on the mode and camera setup Pause.Audio detection is on Record video manually.Motion detection is on Snapshot.WiFi signal Brightness.USB device storage Microphone. Start using Talk and Listen.Battery Speaker. Mute the audio.
Full screen.
Camera nameCamera feed Camera icons Select devicesNew recordings Snapshot and video libraryDetection modesSettings
View Your Content 20
View Camera Feeds You can view your camera feeds at any time.
¾To view camera feeds: 1. Tap the Arlo icon on your mobile device.
If you are using a computer, enter arlo.netgear.com in the address bar of a browser.
The Devices page displays. The icons above each camera feed depend on the rules in the currently selected mode and how the camera is connected. For information about these icons, see View the Devices page on page 19.
2. To view and listen to a live feed, Tap or click Live on the camera feed image.
A row of live feed icons displays below the live stream image for the camera.
3. To stop viewing and listening to the live feed, Tap or click the Pause icon.
Pan and Zoom Video You can pan and zoom to focus in on the high-def details of any live or recorded video. Just pinch and drag any image as you do with photos on your smartphone.
¾To pan and zoom video: 1. Tap the Arlo icon on your mobile device.
If you are using a computer, enter arlo.netgear.com in the address bar of a browser.
The Devices page displays.
2. Tap or click Library.
The calendar displays on the top of the page.
3. Tap or click any live video or prerecorded video from your Arlo library.
4. To pan and zoom using a mobile device, do the following: – To zoom in and out of the video, use the pinch gesture.
– To move around the zoomed-in frame, touch and drag.
5. To pan and zoom using a computer, do the following: – To zoom in and out, click the Zoom icon.
– To move around in the frame, use your mouse button.
View Your Content 21
Record Clips From Live Video ¾To record clips from live video: 1. Tap the Arlo icon on your mobile device.
If you are using a computer, enter arlo.netgear.com in the address bar of a browser.
The Devices page displays.
2. Tap or click Live in the camera feed image.
The camera feed icons display at the bottom of the camera feed image.
3. Tap or click Record Video .
This icon turns red to indicate that you are recording the live feed.
4. To stop recording, Tap or click Record Video .
The recording is saved in your library.
Take a Snapshot From Live Video ¾To take a snapshot from live video: 1. Tap the Arlo icon on your mobile device.
If you are using a computer, enter arlo.netgear.com in the address bar of a browser.
The Devices page displays.
2. Tap or click Live in the camera feed image.
The camera feed icons display at the bottom of the camera feed image.
3. Tap or click Snapshot .
The snapshot is saved in your library.
View Your Content 22
Talk and Listen ¾To talk and listen: 1. Tap the Arlo icon on your mobile device.
If you are using a computer, enter arlo.netgear.com in the address bar of a browser.
The Devices page displays.
2. Tap or click Live in the camera feed image.
The camera feed icons display at the bottom of the camera feed image.
3. Tap or click Microphone .
A microphone button displays.
4. Wait for the button to turn bright green.
This can take up to five seconds. When the button is bright green, Talk and Listen is ready.
5. Press and hold or click and hold the Microphone button and speak.
Control the Camera Feed Image If you use more than one camera, you can change the order in which the camera feeds are displayed on the Devices page. You can also zoom, invert, or rotate the camera feed image.
Change the Camera Order ¾To change the camera order on the Devices page: 1. Tap the Arlo icon on your mobile device.
If you are using a computer, enter arlo.netgear.com in the address bar of a browser.
The Devices page displays.
2. Tap or click Settings.
The Settings page displays.
View Your Content 23
3. Under System, Tap or click Device Order.
A list of devices displays in the order that they display on the Devices page.
4. If you are using a smartphone or tablet, tap Edit at the top of the page.
A list icon displays.
5. Tap and hold or right-click the list icon and drag the camera to the correct position on the list.
6. Tap or click Done.
Your settings are saved.
Zoom a Camera Image ¾To zoom a camera image: 1. Tap the Arlo icon on your mobile device.
If you are using a computer, enter arlo.netgear.com in the address bar of a browser.
The Devices page displays.
2. Tap or click Settings > My Devices.
A list of devices displays.
3. Tap or click the camera.
The camera settings display.
4. Tap or click Video Settings.
5. Under Activity Zones, Tap or click Zoom .
6. Resize and position the image box as necessary.
7. Tap or click Zoom .
Your settings are saved.
View Your Content 24
Invert a Camera Feed You can invert the video feed image.
¾To invert the video display: 1. Tap the Arlo icon on your mobile device.
If you are using a computer, enter arlo.netgear.com in the address bar of a browser.
The Devices page displays.
2. Tap or click Settings > My Devices.
A list of devices displays.
3. Tap or click the camera.
The camera settings display.
4. Tap or click Video Settings.
The Video Settings page displays.
5. Tap or click Rotate Image.
6. The camera feed image is inverted.
Cloud Recording With cloud recording, everything the Arlo Pro cameras record is sent to the cloud for secure storage in your library. You can access these recordings from anywhere you are using a mobile device, or on a Windows or Mac computer. All recordings are encrypted with the user name and password you that create. No one else can access your recordings.
We provide free cloud storage for the life of the Arlo Pro cameras. We store a rolling 7 days of recordings that are created when the Arlo Pro camera detects motion or sound. You can connect up to five cameras free of chanrge with the Arlo Basic plan.
You can pay to store recordings in the cloud for the last 14 days or 30 days. You can download recordings and save them to your mobile device or computer for long-term storage.
View Your Content 25
View Recordings and Snapshots Your Arlo Pro camera stores recordings and snapshots in the library. You can use the filter and the calender to find and view specific recordings.
Use the Library You can use the library to find and view recordings based on the date.
¾To use the library: 1. Tap the Arlo icon on your mobile device.
If you are using a computer, enter arlo.netgear.com in the address bar of a browser.
The Devices page displays.
2. Tap or click Library.
The Library page displays a calendar.
3. If it is more than one month since you started recording, use the arrows on either side of the month to select a month to view.
Days on which a video clip was recorded are indicated with a green circle.
4. Tap or click a highlighted date.
Recordings from that date display below the calendar.
View Your Content 26
Use the Filter You can use the filter to find and view recordings based on criteria that you select.
¾To use the filter to view your library: 1. Tap the Arlo icon on your mobile device.
If you are using a computer, enter arlo.netgear.com in the address bar of a browser.
The Devices page displays.
2. Tap or click Library.
The Library page displays.
3. Tap or click the Filter iconin the upper left corner of the page.
The filter page displays.
4. Tap or click the filtering criteria that you want to use.
5. To remove filtering, Tap or click Reset.
6. Tap or click Done.
The Filter icon becomes solid green to show that you are using filtering.
Recordings that match your filter selections display. Dates with recordings are highlighted in dark green.
Turn Off the Filter The Filter icon on the Library page is solid green when you are using filtering.
When filtering is used, only the recordings in your library that match your filter criteria display. You can turn off filtering.
¾To turn off filtering for your library: 1. Tap the Arlo icon on your mobile device.
If you are using a computer, enter arlo.netgear.com in the address bar of a browser.
The Devices page displays.
2. Tap or click Library.
View Your Content 27
3. Tap or click the Filter icon in the upper left corner of the page.
The Filter page displays.
4. Tap or click Reset at the bottom of the page.
Filtering is turned off. The Filter icon becomes an outline to show that filtering is not in use.
Share and Manage Library Recordings Download Recordings ¾To download clips from the library: 1. Tap the Arlo icon on your mobile device.
You can also enter arlo.netgear.com in the address bar of a browser.
The Devices page displays.
2. Tap or click Library.
The Library page displays.
3. Tap or click a snapshot or video.
4. Tap or click .
5. Tap or click OK to confirm.
The file you selected is downloaded.
Create a Favorite Recording ¾To create a favorite recording: 1. Tap the Arlo icon on your mobile device.
You can also enter arlo.netgear.com in the address bar of a browser.
The Devices page displays.
2. Tap or click Library.
The Library page displays.
View Your Content 28
3. Tap or click a snapshot or video.
4. Tap or click .
Share Recordings ¾To share recordings: 1. Tap the Arlo icon on your mobile device.
You can also enter arlo.netgear.com in the address bar of a browser.
The Devices page displays.
2. Tap or click Library.
The Library page displays.
3. Tap or click a snapshot or video.
4. Tap or click .
5. Share the file.
Donate Recordings for Research You can donate video or snapshot files to NETGEAR Arlo to use for research and development of Arlo products.
¾To donate recordings: 1. Tap the Arlo icon on your mobile device.
You can also enter arlo.netgear.com in the address bar of a browser.
The Devices page displays.
2. Tap or click Library.
The Library page displays.
3. Tap or click a snapshot or video.
4. Tap or click .
5. Tap or click OK to confirm.
The file is sent to NETGEAR Arlo.
View Your Content 29
Delete Recordings ¾To delete recordings: 1. Tap the Arlo icon on your mobile device.
You can also enter arlo.netgear.com in the address bar of a browser.
The Devices page displays.
2. Tap or click Library.
The Library page displays.
3. Tap or click a snapshot or video.
4. Tap or click .
5. Tap or click OK to confirm.
The file is deleted.
30
3. USB Device Storage With Arlo Pro All recordings are stored in the cloud, but you can optionally connect a USB
storage device to the Arlo Pro base station and use the USB storage device as a backup location to store recordings. Simply connect a USB storage device and the base station automatically enables all the settings for you. The USB storage device cannot be used on its own as a substitute for cloud recording.
If you connect a USB storage device, the camera records to both the cloud and the USB storage device for motion-triggered and audio-triggered recordings (not CVR).
If the camera and base station are powered on, but the Internet goes down, the camera continues to record to the USB storage device.
The Arlo app notifies you if the USB storage device is full. The camera can reformat the card for you. See Format a USB Storage Device on page 34.
Connect a USB Storage Device ¾To connect a USB storage device to the Arlo Pro base station: Plug a USB storage device into a USB port on the Arlo Pro base station.
Note: Before disconnecting the USB storage device, you must safely eject it. See Safely Eject and Remove a USB Device on page 31.
31
USB Device Storage With Arlo Pro View the USB Storage Device Status The Arlo app notifies you if the USB storage device is getting full or if the USB
storage device is not the correct format. You can also use the Arlo app to view the USB storage device status.
¾To view the status of a USB storage device connected to the base station: 1. Tap the Arlo icon on your mobile device.
If you are using a computer, enter arlo.netgear.com in the address bar of a browser.
The Devices page displays.
2. Tap or click Settings > My Devices.
The base station and a list of cameras displays.
3. Tap or click the base station.
The Device Settings page displays.
4. Tap or click Local Storage.
The Local Storage page displays.
The USB Device status shows whether the USB storage device is ready, must be formatted, or is full.
Safely Eject and Remove a USB Storage Device Note: USB storage devices must be safely ejected so that recordings do not occur as you are removing the USB storage device. Removing the USB storage device while it is in use can cause the USB storage device to become permanently unusable. The files on the USB
storage device might be corrupted.
If you remove the only USB storage device that is connected to your Arlo Pro base station, USB recording is disabled until you connect another USB storage device.
If another USB storage device is already connected when you remove the enabled USB storage device, USB recording is automatically enabled on the other USB
storage device instead.
32
USB Device Storage With Arlo Pro ¾To safely eject and remove a USB storage device: 1. Tap the Arlo icon on your mobile device.
If you are using a computer, enter arlo.netgear.com in the address bar of a browser.
The Devices page displays.
2. Tap or click Settings > My Devices.
A list of cameras displays.
3. Tap or click the camera.
The base station and a list of cameras displays.
4. Tap or click the base station.
The Device Settings page displays.
5. Tap or click Local Storage.
The Local Storage page displays. Connected USB storage devices are numbered to match the USB ports on the base station. If you are not sure which device to remove, check the number on the Arlo Pro base station USB port into which the USB storage device is inserted.
6. Tap or click the USB storage device that you want to remove.
7. Tap or click Safely Eject USB Device.
8. Wait for the Unmounting USB storage device progress message to close, and then remove the USB storage device from your Arlo Pro base station.
The settings on the page dim to show that the USB storage device is ejected.
The camera stops recording onto the USB storage device. The USB storage device can now be safely removed.
If another USB storage device is still connected to your Arlo Pro base station and USB recording is turned on, recording is automatically enabled on that USB
storage device.
33
USB Device Storage With Arlo Pro View Video Clips on a USB Storage Device Video clips on USB storage devices do not display in the Arlo app, but you can use a Windows or Mac computer to view the clips.
¾To view video clips on a USB storage device: 1. Safely eject the USB storage device.
For more information, see Safely Eject and Remove a USB Device on page 31.
Cloud recording is still enabled. If another USB storage device is connected to your Arlo Pro base station and USB recording is turned on, recording is automatically enabled on that USB storage device.
2. Connect the USB storage device that you ejected to a Windows computer or a Mac computer.
3. Wait for the USB storage device to appear in the available drives on your computer, and then open the drive folder to view the files on your USB storage device.
4. Open the arlo folder.
Recorded videos are saved in this folder in MP4 format. Video files are named according to this convention: camera serial number_video number_date_video clip tag. Dates are in the format YYYYMMDD.
Note: If you are unable to play MP4 files on your computer, update your media player software to the latest version and try again. You can also download a free universal multimedia player, such as VLC.
Change the USB Storage Device Overwrite Setting By default, when the available USB storage is less than 20%, the oldest recording is erased to make room for new recordings. You can change this setting if you want.
¾To change the USB storage device overwrite setting: 1. Tap the Arlo icon on your mobile device.
If you are using a computer, enter arlo.netgear.com in the address bar of a browser.
The Devices page displays.
2. Tap or click Settings > My Devices.
34
USB Device Storage With Arlo Pro The base station and a list of cameras displays.
3. Tap or click the base station.
The Device Settings page displays.
4. Tap or click Local Storage.
The Local Storage page displays.
5. Tap or click Automatic Overwrite.
The setting changes.
Format a USB Storage Device The Arlo app displays a pop-up message to let you know if it is necessary to format the USB storage device. The Arlo Pro base station can format the USB storage device.
Warning: Do not use the Arlo Pro base station to format storage devices with more than 2 TB of storage capacity. The base station formats storage devices using the FAT32 file system, which supports a maximum of 2 TB of storage space. The formatting process reduces the capacity of larger storage devices to a maxiumum of 2 TB.
¾To format a USB storage device: 1. If you want to save files on the USB storage device, make sure to save or copy the files in another location before you format the USB storage device.
Formatting a USB storage device deletes files on the device.
2. Connect the USB storage device to a USB port on the Arlo Pro base station.
For more information, see Connect a USB Device on page 30.
3. Tap the Arlo icon on your mobile device.
If you are using a computer, enter arlo.netgear.com in the address bar of a browser.
The Devices page displays.
4. Tap or click Settings > My Devices.
The base station and a list of cameras displays.
35
USB Device Storage With Arlo Pro 5. Tap or click the base station.
The Device Settings page displays.
6. Tap or click Local Storage.
The Local Storage page displays.
If you see the message Requires Formatting next to USB Device 1 or USB Device 2, the USB storage device is not in the correct format (FAT32). You must format the USB storage device before you can use it for local storage.
Warning: Formatting the USB storage device erases all data from the device. If you want to keep any files that are on the USB storage device, copy those files to another location before you format the USB storage device.
Do not use the Arlo Pro base station to format storage devices with more than 2 TB of storage capacity. The base station formats storage devices using the FAT32 file system, which supports a maximum of 2 TB of storage space. The formatting process reduces the capacity of larger storage devices to a maxiumum of 2 TB.
7. Tap or click > next to the USB storage device that you want to format.
8. Tap or click Format USB Device.
9. Wait for USB Device Status to change from Formatting to Ready.
Warning: Warning: Do not remove the USB storage device while it is formatting. The USB storage device might become permanently unusable.
Turn on Recording for a USB Storage Device ¾To turn USB storage device recording on: 1. Tap the Arlo icon on your mobile device.
If you are using a computer, enter arlo.netgear.com in the address bar of a browser.
The Devices page displays.
2. Tap or click Settings > My Devices.
The base station and a list of cameras displays.
3. Tap or click the base station.
The Device Settings page displays.
36
USB Device Storage With Arlo Pro 4. Tap or click Local Storage.
The Local Storage page displays.
5. Select a USB storage device.
6. If the message next to the USB storage device is Requires Formatting, follow the formatting procedure.
For more information about formatting, see Format a USB Storage Device on page 34.
7. Tap or click USB Device Recording.
USB device recording toggles off and on.
Stop Recording Onto a USB Storage Device ¾ To stop recording onto a USB storage device: 1. Tap the Arlo icon on your mobile device.
If you are using a computer, enter arlo.netgear.com in the address bar of a browser.
The Devices page displays.
2. Tap or click Settings > My Devices.
The base station and a list of cameras displays.
3. Tap or click the base station.
The Device Settings page displays.
4. Tap or click Local Storage.
5. Tap or click the slider next to USB Device Recording to stop recording to your USB storage device.
37
4. Personalize Your System You can customize Arlo Pro settings such as the camera name to make it easier to manage. You can grant access to friends and set up cloud recording.
Name Your Camera You can easily customize your Arlo Pro camera by renaming it.
¾To rename your Arlo Pro camera: 1. Tap the Arlo icon on your mobile device.
If you are using a computer, enter arlo.netgear.com in the address bar of a browser.
The Devices page displays.
2. Tap or click Settings > My Devices.
A list of cameras displays.
3. Tap or click the camera.
The camera settings display.
4. In the Name field, delete the current name and enter a new name that reminds you of the camera’s location, such as Garage or Front Door.
Camera names are limited to 32 characters.
5. Tap or click Save.
Your settings are saved.
Profile Settings When you use New Setup, the email address and password that you enter are saved as your profile. You can change the password and the user name. In the mobile app, you are automatically logged in when you launch the Arlo app, but you can turn Auto Login off and on.
Personalize Your System 38
Change Your Password and User Name ¾To change your password and user name: 1. Tap the Arlo icon on your mobile device.
If you are using a computer, enter arlo.netgear.com in the address bar of a browser.
The Devices page displays.
2. Tap or click Settings.
The Settings page displays.
3. Under Account, Tap or click Profile.
The Profile page displays.
4. If you are using a smartphone, tap Edit at the top of the page.
The Profile page displays.
5. Type the new entries in the password and name fields.
6. Tap or click Done.
Your settings are saved.
Turn Auto Login On or Off for a Smartphone When Auto Login is turned on, launching the Arlo app on your smartphone automatically logs you in with the email address and password that you used the last time you logged in.
¾To turn Auto Login on or off on your smartphone: 1. Tap the Arlo icon on your mobile device.
If you are using a computer, enter arlo.netgear.com in the address bar of a browser.
The Devices page displays.
2. Tap or click Settings.
The Settings page displays.
Personalize Your System 39
3. Under Account, Tap or click Profile.
The Profile page displays.
4. Tap Auto Login.
Your settings are saved.
Grant Access to Friends You can add friends to your Arlo account. Friends can view live streams from your cameras; record video clips; view, share, mark as favorite, and delete clips from your library; and take snapshots. Friends are granted limited access to some of the settings and features of your Arlo account. You can select which cameras friends can see and what administrative rights are available to them.
Add a Friend ¾To add a friend to your Arlo account: 1. Tap the Arlo icon on your mobile device.
If you are using a computer, enter arlo.netgear.com in the address bar of a browser.
The Devices page displays.
2. Tap or click Settings.
The Settings page displays.
3. Under Account, Tap or click Grant Access.
4. Tap or click Add or the + symbol.
5. Enter the first name, last name, and email address of the person that you want to add as a friend.
6. Tap or click the cameras that you want the friend to be able to access.
7. Tap or click Send Invite.
An email is sent inviting the friend to create an Arlo account. This friend’s name is displayed with the status Pending. When a friend accepts your invitation, the status changes to Accepted.
Personalize Your System 40
Edit a Friend’s Access Privileges ¾To edit a friend’s access privileges: 1. Tap the Arlo icon on your mobile device.
If you are using a computer, enter arlo.netgear.com in the address bar of a browser.
The Devices page displays.
2. Tap or click Settings.
3. Under Account, Tap or click Grant Access.
A list of your friends displays with the status of their accounts.
4. Tap or click the friend, and Tap or click Edit .
The Edit page displays.
5. Tap or click cameras to select or deselect them.
6. Tap or click Allow Access Rights.
Selecting Allow Access Rights allows this friend to change your account and camera settings.
7. Tap or click Done.
Your settings are saved.
Delete a Friend ¾To delete a friend’s privileges: 1. Tap the Arlo icon on your mobile device.
If you are using a computer, enter arlo.netgear.com in the address bar of a browser.
The Devices page displays.
2. Tap or click Settings.
3. Under Account, Tap or click Grant Access.
A list of your friends displays with the status of their accounts.
Personalize Your System 41
4. Select the friend, and Tap or click Edit .
The Edit page displays.
5. Tap or click Delete Friend.
6. Tap or click Yes.
The friend is deleted.
42
5. Modes, Rules, and Smart Alerts Modes and rules let you tell your Arlo system what to do in different situations. For example, you can set your Arlo system to record a 30-second video when the motion sensor is activated on a specific camera and alert you via email.
Modes Modes let you tell your Arlo cameras to respond differently at different times.
For example, you probably don’t want to receive an alert about motion in the living room while you’re doing yoga in the living room. You might want to turn on a different mode when you’re away on vacation than when you’re just out at the store for an hour. Arlo modes give you complete control over how your cameras respond to motion or sound.
You can create your own modes, but Arlo Pro comes with the following modes: Armed. Detection is on for this camera.
Disarmed. Detection is off for this camera.
Schedule. Manage detection based on a schedule.
Geofencing. You can use geofencing to arm, disarm, or resume a schedule mode when you arrive at or leave a given location based on your mobile device.
If you add new modes or you use the SmartThings app to manage your Arlo cameras, the new modes are listed in the Arlo app when you tap or click .
You can customize the Armed and Schedule modes and you can add new modes.
You might want to create a mode in which some motion sensors and cameras are active but others are not. For example, when you are sleeping, you might want your exterior cameras to be active, but your interior cameras to be inactive.
Note: You can create different modes for the same camera, but the camera can use only one mode at a time.
43
Modes, Rules, and Smart Alerts Rules Each mode consists of one or more rules that provide detailed instructions for your Arlo system. For each mode, you can set the following options: – Trigger device. The trigger device is the camera that detects motion or sound.
– Trigger. Triggers can be motion detection, sound detection on Arlo Pro WireFree cameras. You can adjust the camera’s sensitivity to motion and sound to minimize false alarms.
– Devices. Motion or sound detection on one camera can trigger another camera to record video or take a snapshot. For example, you might want to have your back yard camera or your driveway camera trigger your door camera to start recording video.
– Action. Each device that responds to motion or sound can record video, take a snapshot, or do nothing. You can adjust the length of the video recording from a minimum of ten seconds to a maximum of two minutes. If you are using an Arlo Pro base station, you can also tell your Arlo Pro base station to turn on the siren in response to a trigger. The siren has four duration options and three loudness options.
– Notifications. When a trigger is detected, Arlo can send you push notifications, email alerts, or both. You can also choose to send email alerts to friends, family members, pet sitters, or anyone who might need to respond when a camera is triggered.
The Arlo mobile and web apps guide you through the process of setting up your Arlo system and telling it what you want it to do, but the Arlo knowledge base also has detailed instructions to help you get the most out of your Arlo Smart Home Security System.
Select a Mode You can turn modes on and off manually or set modes to activate according to a schedule. Use the following methods when you are not using a schedule to control a mode or to override an existing schedule. You must use at least one mode. The Arlo Pro camera is always in a mode, even if that mode is set to do nothing.
Use the Arlo App Menus to Select a Mode ¾To select a mode for a camera: 1. Tap the Arlo icon on your mobile device.
44
Modes, Rules, and Smart Alerts If you are using a computer, enter arlo.netgear.com in the address bar of a browser.
The Devices page displays.
2. Tap or click Mode.
A list of cameras displays.
3. Tap or click the Arlo Pro camera.
The Mode page displays.
4. Tap or click a mode to activate it.
The mode that you selected turns on immediately. The mode stays active until you change it.
When you view the Devices page, the icons that display at the top of the camera feed are based on the currently selected mode: Motion. Motion detection is on.
Sound. Audio detection is on.
Use the 3D Touch Shortcut to Select a Mode If you are using a mobile device that supports the 3D Touch feature, you can use 3D Touch to quickly select a mode.
¾To use 3D Touch to select a mode for a camera: 1. Tap and hold the Arlo icon on your mobile device.
A menu displays listing the default mode selections: Armed, Disarmed, Scheduled, and Geofencing.
2. Tap a mode in the menu to activate the mode.
The Mode page displays with the activated mode selected. The mode stays active until you change it.
When you view the Devices page, the icons that display at the top of the camera feed are based on the currently selected mode: Motion. Motion detection is on.
Sound. Audio detection is on.
45
Modes, Rules, and Smart Alerts Change Motion Sensitivity You can easily change the sensitivity level for Arlo Pro cameras.
¾To change the sensitivity level for a camera: 1. Tap the Arlo icon on your mobile device.
If you are using a computer, enter arlo.netgear.com in the address bar of a browser.
The Devices page displays.
2. Tap or click Mode.
A list of cameras displays.
3. Tap or click the Arlo Pro camera.
The Mode page displays.
4. Tap or click Editnext to the mode.
The Edit Rule page displays.
5. Tap or click Edit next to the rule that you want to edit.
6. Under If the following, Tap or click Editnext to Motion is detected.
The Motion detection settings page displays.
7. Move the slider to adjust the sensitivity level for motion detection for this camera.
If you used a mobile device to specify the settings, your settings are saved.
8. If you used a browser to specify the settings, click Save.
Your settings are saved.
46
Modes, Rules, and Smart Alerts Automatically Stop Recording When Motion Stops ¾To automatically stop recording when motion stops: 1. Tap the Arlo icon on your mobile device.
You can also enter arlo.netgear.com in the address bar of a browser.
The Devices page displays.
2. Tap or click Mode.
3. Tap or click the device whose mode you want to edit.
If you only use one device, it is preselected.
4. Tap the pencil icon or click Edit next to the mode that you want to edit.
5. Under Then do the following, tap the pencil icon or click Edit next to Record video.
6. Select Record until activity stops (up to 300 sec).
Change Audio Sensitivity ¾To change audio sensitivity for a camera: 1. Tap the Arlo icon on your mobile device.
If you are using a computer, enter arlo.netgear.com in the address bar of a browser.
The Devices page displays.
2. Tap or click Mode.
A list of cameras displays.
3. Tap or click the Arlo Pro camera.
A list of modes displays.
4. Tap or click Edit next to Armed.
The Edit Rule page displays.
5. Tap or click Edit next to the rule.
47
Modes, Rules, and Smart Alerts The Edit Rule page displays.
6. Under If the following, Tap or click Editnext to Audio is detected.
The Audio Detection page displays.
7. Move the slider to the desired level of audio detection.
If you used a mobile device to specify the settings, your settings are saved.
8. If you used a browser to specify the settings, click Save.
Your settings are saved.
Add a Rule That Includes a Siren Trigger To add a rule that includes a siren trigger, you must add a new mode or edit an existing mode.
Note: Only Arlo Wire-Free and Arlo Pro Wire-Free cameras connected to an Arlo Pro base station can trigger the siren.
For more information about adding a new mode, see Add a Mode on page 55.
To edit an existing mode, follow these instructions.
¾To add a rule that includes a siren trigger: 1. Tap the Arlo icon on your mobile device.
If you are using a computer, enter arlo.netgear.com in the address bar of a browser.
The Devices page displays.
2. Tap or click Mode.
A list of devices displays.
3. Tap or click the Arlo Pro base station.
4. Tap or click > next to the mode.
5. Under Rules, tap or click Edit next to the camera.
6. Select the Turn Siren ON check box.
7. Tap or click > next to Sound Alarm.
48
Modes, Rules, and Smart Alerts 8. Set the sliders for Siren Duration and Siren Loudness.
9. Tap < Edit Rule or click Back.
10. Tap Done or click Save.
Note: This rule is not active until you activate the mode to which you added the siren trigger.
Manage Alerts Arlo can push notifications to your smartphone, send you email alerts, or do both. To receive Arlo notifications on your phone, you must get the Arlo app.
Note: If you log out of the Arlo app on your smartphone or mobile device, you will stop receiving push notifications.
¾To change the alert settings for a camera: 1. Tap the Arlo icon on your mobile device.
If you are using a computer, enter arlo.netgear.com in the address bar of a browser.
The Devices page displays.
2. Tap or click Mode.
A list of cameras displays.
3. Tap or click the Arlo Pro camera.
A list of modes displays.
4. Tap or click Editnext to Armed or your custom mode.
The Edit Rule page displays.
5. Under If the following, specify the motion detection and audio detection settings.
6. Under Then do the following, specify the settings for how Arlo Pro responds to motion or sound detection.
The selections are Do nothing, Record video, or Take snapshot.
49
Modes, Rules, and Smart Alerts 7. Under Alert, Tap or click Push Notification to turn alerts on and off for your mobile device.
8. For email notifications, make sure that the Email Alerts check box is selected.
9. To specify an email address, Tap or click Edit next to Email Alerts and enter the email address.
Set Up Geofencing Geofencing is a virtual fence that helps you discover when something or someone enters or exits a predefined zone. You can use Arlo geofencing to arm, disarm, or resume schedule modes, when your mobile device is in zone or out of zone.
To set up geofencing, you must use your mobile device and you must allow the Arlo app to use your location.
Configure Your Mobile Device ¾To configure your mobile device for more accurate geofencing: 1. Enable GPS or location services so that Arlo can locate your device.
2. Enable WiFi.
Set Up Geofencing for the First Time and Set Up Modes ¾To set up geofencing for the first time and set up modes: 1. Tap the Arlo icon on your mobile device.
The Devices page displays.
2. Tap Mode.
A list of cameras displays.
3. Tap or click the camera.
A list of available modes displays.
4. Tap Geofencing.
The Arlo Would Like to Use your Location prompt displays.
5. Tap Allow.
Geofencing works only if Arlo can locate your mobile device. The Location Address page displays your current address.
50
Modes, Rules, and Smart Alerts 6. To change the address, tap the Address field, type the address for your location, and then tap Next.
The geofence radius displays as Medium.
7. To change your radius setting, tap the Radius icon, select a radius size, and tap Next.
Radius size options are Small, Medium, or Large (approximately 150 meters, 250 meters, and 500 meters, respectively).
8. Enter a name for your location and tap Next.
The Away Mode page displays a list of available modes. The away mode is the detection mode used by the camera when you are away from the location that you specified.
9. Select an away mode and tap Next.
Note: When your mobile device is out of zone, the Arlo device defaults to the away mode. Most people select Armed or Custom Mode while they are away.
10. Select a home mode and tap Next.
Note: When your mobile device is in zone, the Arlo device defaults to the home mode.
Most people select Disarmed or Custom Mode while they are home.
If you use more than one enabled mobile device, you might be asked to select an Arlo device to connect it to.
11. To select the preferred mobile device, tap the device and then tap Next.
12. Tap Save.
Your settings are saved.
Geofencing With Multipe Mobile Devices If you want multiple mobile devices to participate in your Arlo geofencing, make sure that the required conditions are met, and then follow the steps to enable geofencing for the devices.
Ensure that these conditions are met: – Your Arlo devices are online.
– Your geofencing feature is enabled.
– Your friend’s mobile device is added to your account.
51
Modes, Rules, and Smart Alerts For more information about adding devices, see Enable or Disable Geofencing for Friends’ Mobile Devices on page 51.
– (Required when your friend wants to participate in geofencing) Your friend is logged in to the Arlo App on his or her mobile device and the GPS or location service enabled on your friend’s mobile device.
Enable or Disable Geofencing for Friends’ Mobile Devices ¾To enable or disable geofencing for your friends’ mobile devices: 1. Tap the Arlo icon on your mobile device.
The Devices page displays.
2. Tap Mode.
A list of cameras displays.
3. Tap or click the camera.
A list of available modes displays.
4. Tap the Edit icon. next to Geofencing The Geofencing editing page displays.
5. Tap Enabled Devices.
The Enabled Device page displays a list of geofencing-enabled mobile devices.
6. Tap the mobile devices that you want to enable for geofencing.
A check mark appears next to the device name when geofencing is enabled.
Note: The device location displays as either In Zone or Out of Zone.
7. To disable geofencing, tap the mobile device again.
The check mark disappears when geofencing disabled.
For more information, see Set Up Geofencing on page 49.
Geofencing Accuracy For accuracy, geofencing uses a combination of GPS, cellular data, and WiFi data.
The local environment affects geofencing as follows: – In urban environments, where the cell towers and WiFi routers are more dense,
52
geofencing accuracy can reach 100–200 meters.
Note: If you live in a skyscraper, geofencing might not work reliably due to GPS
inaccuracies. Using the Large radius setting might help.
– In more rural areas, where cell towers and WiFi routers are sparse, geofencing accuracy can reach several hundred meters.
To improve geofencing accuracy, ensure that your mobile device meets these conditions: – WiFi is turned on.
– GPS or location services are turned on.
Geofencing First In, Last Out Arlo cameras use the first in, last out principal within the geofencing feature.
First in, last out allows you to come and go without worrying about arming and disarming your Arlo cameras. For example, if your roommate leaves the house before you, your Arlo cameras remain disarmed because you are still in the house or geofence. After you leave the house and both devices are outside the geofence, your Arlo cameras are armed.
For more information about managing multiple devices, see Geofencing With Multipe Mobile Devices on page 50.
Schedule Your Camera Rules You can set a schedule to activate and deactivate cameras automatically. Schedules recur weekly. For example, the schedule for Tuesday is repeated every Tuesday as long as the schedule is turned on. Arlo is preconfigured with the following schedule: – Monday through Friday, 8:00 a.m. to 5:00 p.m. All motion sensors are on.
– All other times. All motion sensors are off.
Add a Schedule ¾To add a schedule for a camera: 1. Tap the Arlo icon on your mobile device.
If you are using a computer, enter arlo.netgear.com in the address bar of a browser.
The Devices page displays.
53
2. Tap or click Mode.
A list of cameras displays.
3. Tap or click the Arlo Pro camera.
A list of available modes displays.
4. Tap or click Schedule .
The Schedule mode is selected.
5. Tap or click Editnext to Schedule.
6. Tap or click + Add.
7. Set the days and times and then Tap or click Save.
The schedule is saved.
54
Edit a Schedule ¾To edit a schedule: 1. Tap the Arlo icon on your mobile device.
If you are using a computer, enter arlo.netgear.com in the address bar of a browser.
The Devices page displays.
2. Tap or click Mode.
A list of cameras displays.
3. Tap or click the Arlo Pro camera.
A list of available modes displays.
4. Tap or click Schedule .
5. Tap or click Editnext to Schedule.
6. Tap or click the schedule.
55
7. Change the start and stop times and Tap or click Save.
The schedule is saved.
Add a Mode You can add new modes to tell your Arlo Pro camera what to do in certain situations. For example, you can set your Arlo Pro camera to record videos when the motion sensor is activated and to alert you with an email message.
You can use the rules you create within modes and schedules to customize your Arlo Pro camera. With Arlo Pro cameras, you can create one rule for each mode.
¾To add a mode for a camera: 1. Tap the Arlo icon on your mobile device.
If you are using a computer, enter arlo.netgear.com in the address bar of a browser.
The Devices page displays.
2. Tap or click Mode.
A list of cameras displays.
3. Tap or click the camera.
4. Tap or click Add a Mode.
The New Mode page displays.
5. Enter a name for the mode and Tap or click Next.
The Trigger Device page displays.
6. Tap or click When motion is detected and When audio is detected and then Tap or click Next.
The Motion Settings page displays.
7. Set the motion sensitivity.
You can use the sliders to adjust the sensitivity of the motion sensor: – Raise the sensitivity percentage to increase the number of videos that Arlo captures.
– Lower the sensitivity percentage to decrease the number of videos that Arlo captures.
56
Modes, Rules, and Smart Alerts 8. Tap or click Next.
The Audio Settings page displays.
9. Set the audio sensitivity and Tap or click Next.
The Devices page displays.
10. When prompted, specify what you want the camera to do when motion or audio is detected and Tap or click Next.
You can select Record video, Take snapshot, or Do nothing.
11. When prompted, specify if you want to be notified with alerts when motion or audio is detected.
If you are using a computer web browser, you can also specify the recording time setting.
12. Tap or click Next.
The Summary page displays.
13. Review your settings and Tap or click Save.
Your settings are saved.
Add a Mode With Different Rules for Each Camera With Arlo Pro Wire-Free, you can create multiple rules within the same mode so that each camera performs different actions and sends different alerts.
You can also use schedule mode to activate modes automatically at different times of the day or week. For more information about schedule mode, see Add a Schedule on page 52.
¾To add a mode with different actions or alerts for different cameras: 1. Tap the Arlo icon on your mobile device.
If you are using a computer, enter arlo.netgear.com in the address bar of a browser.
The Devices page displays.
2. Tap or click Mode.
A list of cameras displays.
57
Modes, Rules, and Smart Alerts 3. Tap or click the camera.
4. Tap or click Add a Mode.
The New Mode page displays.
5. Enter a name for the mode and Tap or click Next.
The Trigger Device page displays.
6. Tap or click an Arlo-Pro camera to select it as the trigger device for a rule and then tap or click Next.
7. If you want the camera to perform an action when motion or audio is detected, tap or click Next.
Otherwise, clear the check box for the trigger that you do not want to use.
8. If you selected motion as a trigger, set the Motion Sensitivity using the slider and tap or click Next.
9. If you are using an Arlo Pro Wire-Free camera and you selected audio as a trigger, set the Audio Detection Sensitivity using the slider and click or tap Next.
10. When prompted, specify what you want the trigger device to do when motion or audio is detected.
Note: You can select Record video, Take snapshot, or Do nothing.
11. To turn on the Arlo-Pro base station siren when the device detects motion or sound, select the Turn Siren ON check box.
12. If you selected Record video, use the slider to specify how long you want your device to record for when motion or audio is detected and tap or click Next.
13. If you selected Turn Siren ON, set the sliders for Siren Duration and Siren Loudness and tap or click Next.
Note: The base station siren is very loud. Prolonged exposure to the siren might cause permanent hearing loss. Exercise caution when creating siren triggers.
14. Select the notifications that you want to receive and tap or click Next.
15. If you selected Email Alerts, enter the email addresses where you want to receive alerts and tap or click Next.
16. Review the summary of your settings and tap or click Save.
58
Your new mode is saved.
17. From the mode menu, tap or click > next to the mode that you just created.
18. Tap or click Add Rule.
19. Repeat steps 6-16 to add an additional rule with different trigger devices, actions, and alerts.
You can add one rule for each Arlo Pro Wire-Free camera that is connected to the same base station.
59
6. Settings You can customize the Arlo Pro settings.
Turn the Arlo App Fingerprint ID Login On and Off The Arlo app supports Touch ID fingerprint identity sensors. If you are using a mobile device with this feature, you can turn the Arlo app Touch ID login on and off.
¾To turn the Arlo app Touch ID login on and off: 1. Tap the Arlo icon on your mobile device.
The Devices page displays.
2. Tap Settings.
The Settings page displays.
3. Tap Profile.
The Profile page displays.
4. Tap Log in with Touch ID.
Tapping this button turns Log in with Touch ID on and off.
Change the Time Zone ¾To change the time zone: 1. Tap the Arlo icon on your mobile device.
If you are using a computer, enter arlo.netgear.com in the address bar of a browser.
The Devices page displays.
2. Tap or click Settings > My Devices.
A list of devices displays.
3. Tap or click the base station.
The base station settings page displays.
Settings 60
4. Tap or click Time Zone.
The Time Zone page displays.
5. Tap or click a time zone.
6. Tap or click Done.
If you are using a mobile device, your settings are saved.
7. If you are using a computer, click Save.
Your settings are saved.
Camera Settings Turn Off the Camera LED
The LED on the Arlo Pro camera lights in different colors. You can turn off this LED.
¾To turn off the LED on the Arlo Pro camera: 1. Tap the Arlo icon on your mobile device.
If you are using a computer, enter arlo.netgear.com in the address bar of a browser.
The Devices page displays.
2. Tap or click Settings > My Devices.
A list of devices displays.
3. Tap or click the camera.
The camera settings display.
4. Tap or click Status Light.
If you are using a mobile device, your settings are saved.
Settings 61
5. If you are using a computer, click Save.
Your settings are saved.
Change the Video Resolution The default video resolution is 720P. You can change this setting to a higher or lower resolution. Decreasing the resolution of Arlo Pro videos reduces the required WiFi bandwidth.
¾To change the video resolution: 1. Tap the Arlo icon on your mobile device.
If you are using a computer, enter arlo.netgear.com in the address bar of a browser.
The Devices page displays.
2. Tap or click Settings > My Devices.
A list of devices displays.
3. Tap or click the camera.
The camera settings display.
4. If you are using the Arlo App on a mobile device, tap Video Settings.
The Video Settings page displays.
5. Tap or click Video Resolution.
The Video Resolution page displays.
6. Tap or click a setting.
7. Tap or click Done.
If you are using a mobile device, your settings are saved.
8. If you are using a computer, click Save.
Your settings are saved.
Settings 62
Turn Night Vision On and Off When night vision is enabled, the camera automatically turns on infrared (IR) LEDs to record in low light conditions. We recommend that you turn off night vision if the Arlo Pro camera is facing reflective surfaces, such as windows.
¾To turn night vision on and off: 1. Tap the Arlo icon on your mobile device.
If you are using a computer, enter arlo.netgear.com in the address bar of a browser.
The Devices page displays.
2. Tap or click Settings > My Devices.
A list of devices displays.
3. Tap or click the camera.
The camera settings display.
4. If you are using the Arlo App on a mobile device, tap Video Settings.
The Video Settings page displays.
5. Tap or click Night Vision.
Your settings are saved.
Audio Settings Turn the Microphone Off and On ¾To turn the microphone off and on: 1. Tap the Arlo icon on your mobile device.
If you are using a computer, enter arlo.netgear.com in the address bar of a browser.
The Devices page displays.
2. Tap or click Settings > My Devices.
A list of devices displays.
Settings 63
3. Tap or click the camera.
The camera settings display.
4. If you are using the Arlo App on a mobile device, tap Audio Settings.
The Audio Settings page displays.
5. Tap or click Microphone.
Your settings are saved.
Change the Speaker Settings You can turn the speaker off and on and you can control the volume on your camera settings.
¾To change the speaker settings: 1. Tap the Arlo icon on your mobile device.
If you are using a computer, enter arlo.netgear.com in the address bar of a browser.
The Devices page displays.
2. Tap or click Settings > My Devices.
A list of devices displays.
3. Tap or click the camera.
The camera settings display.
4. If you are using the Arlo App on a mobile device, tap Audio Settings.
The Audio Settings page displays.
5. To turn the speaker off and on, Tap or click Speaker.
6. To change the speaker volume, move the Speaker Volume slider.
Your settings are saved.
Settings 64
Base Station Settings You can view or change base station settings.
Change the Base Station Name When you set up your Arlo system, you entered a name for the base station. You can change this name.
¾To change the base station name: 1. Tap the Arlo icon on your mobile device.
If you are using a computer, enter arlo.netgear.com in the address bar of a browser.
The Devices page displays.
2. Tap or click Settings > My Devices.
A list of devices including the base station cameras displays.
3. Tap or click the base station.
The base station settings page display.
4. Tap or click Name.
5. Enter a new name for the base station.
The new name is displayed in the Arlo app.
Adjust the Base Station Flicker Setting The combination of certain artificial light sources and the camera shutter speed might result in flickering in recorded video. The default setting for the base station is Auto, but you can change the flicker adjustment.
¾To select the base station flicker adjustment: 1. Tap the Arlo icon on your mobile device.
If you are using a computer, enter arlo.netgear.com in the address bar of a browser.
The Devices page displays.
2. Tap or click Settings > My Devices.
Settings 65
A list of devices including the base station cameras displays.
3. Tap or click the base station.
The base station settings page display.
4. Tap or click Flicker Adjustment.
The Flicker Adjustment page displays.
5. Tap or click a setting.
6. Tap or click Save.
Your settings are saved.
View Base Station Device Information ¾To view base station device information: 1. Tap the Arlo icon on your mobile device.
If you are using a computer, enter arlo.netgear.com in the address bar of a browser.
The Devices page displays.
2. Tap or click Settings > My Devices.
A list of devices including the base station cameras displays.
3. Tap or click the base station.
The base station settings page display.
4. Tap or click Device Information.
The firmware level, hardware level, and serial number for the base station display.
Restart the Base Station ¾To restart the base station: 1. Tap the Arlo icon on your mobile device.
If you are using a computer, enter arlo.netgear.com in the address bar of a browser.
Settings 66
The Devices page displays.
2. Tap or click Settings > My Devices.
A list of devices including the base station cameras displays.
3. Tap or click the base station.
The base station settings page display.
4. Tap or click Restart.
The base station restarts.
Remove the Base Station From Your Account ¾To remove the base station from your account: 1. Tap the Arlo icon on your mobile device.
If you are using a computer, enter arlo.netgear.com in the address bar of a browser.
The Devices page displays.
2. Tap or click Settings > My Devices.
A list of devices including the base station cameras displays.
3. Tap or click the base station.
The base station settings page display.
4. Tap or click Remove Device.
The base station is removed from your Arlo account. The base station does not display when you use the Arlo app.
Select the Siren Volume The base station includes a siren. You can manually activate or turn off the siren.
You can also set up motion detection rules to trigger the siren and select the siren volume level when you set up the rule.
WARNING: The loudest siren setting, which is the default loudness option for the siren, is more than 100 decibels. Do not test the siren while people or pets are close to the base station. Prolonged exposure to the siren might cause hearing damage.
The base station siren settings are Loud, Very Loud, and Extremely Loud.
Settings 67
Turn On the Siren WARNING: The loudest siren setting, which is the default loudness option for the siren, is more than 100 decibels. Do not test the siren while people or pets are close to the base station. Prolonged exposure to the siren might cause hearing damage.
¾To turn on the Arlo Pro base station siren: 1. Tap the Arlo icon on your mobile device.
If you are using a computer, enter arlo.netgear.com in the address bar of a browser.
The Devices page displays.
2. Tap or click Turn Siren ON.
3. Tap or click Yes to confirm that you want to turn on the siren.
Note: The siren loudness is determined by the loudness of the siren trigger rule for whichever mode is currently active on the base station. If the active mode does not use any siren trigger rules, the siren defaults to its loudest setting.
Turn Off the Siren To turn off the siren when near the base station, press the button on the top of the base station.
¾To turn off the Arlo Pro base station siren remotely: 1. Tap the Arlo icon on your mobile device.
If you are using a computer, enter arlo.netgear.com in the address bar of a browser.
Settings 68
The Devices page displays.
2. Tap or click Turn Siren OFF.
The siren stops.
View Device Information ¾To view device information: 1. Tap the Arlo icon on your mobile device.
If you are using a computer, enter arlo.netgear.com in the address bar of a browser.
The Devices page displays.
2. Tap or click Settings > My Devices.
A list of devices displays.
3. Tap or click the device.
The settings display.
4. Scroll down to the Version heading and view the firmware version, hardware version, and the serial number.
Restart the Camera ¾To restart the camera: 1. Tap the Arlo icon on your mobile device.
If you are using a computer, enter arlo.netgear.com in the address bar of a browser.
The Devices page displays.
2. Tap or click Settings > My Devices.
A list of devices displays.
3. Tap or click the camera.
The camera settings display.
4. Scroll down and tap or click Restart.
Settings 69
The camera restarts.
Remove a Camera From Your Account ¾To remove a camera from your account: 1. Tap the Arlo icon on your mobile device.
If you are using a computer, enter arlo.netgear.com in the address bar of a browser.
The Devices page displays.
2. Tap or click Settings > My Devices.
A list of devices displays.
3. Tap or click the camera.
The camera settings display.
4. Scroll down and Tap or click Remove Device.
The camera is removed from your account and its settings are deleted.
70
7. Manage Your Subscription Plan Every Arlo camera includes free Basic service that offers basic features and functionality. When activating your camera, you can choose between the Basic, Premier, and Elite service plans.
Subscription Plans Upgrading to a paid service level gives you the ability to increase the uses of your camera to suit your specific needs. Depending on your service level, you can add cameras or cloud storage and share recordings with friends and family. For information about service plans, visit http://bit.ly/1AQGR9k.
You can upgrade a Basic or Premier subscription at any time. When you upgrade from a paid subscription to a higher service level, the system calculates any unused portion of the current term and deducts that prorated amount from the total cost of the upgrade.
Renew Your Service Plan Monthly plans automatically renew each month until you upgrade to an annual plan or cancel, effective the next billing cycle. Annual plans autorenew by default but can be configured to expire at the end of the current annual term.
Upgrade Your Subscription to a Retail or Business Plan ¾To select a Premier or Elite subscription plan: 1. Tap the Arlo icon on your mobile device.
You can also enter arlo.netgear.com in the address bar of a browser.
The Devices page displays.
2. Tap or click Settings.
The Settings page displays.
3. Under Account, Tap or click Subscription.
The Subscription page displays.
71
Manage Your Subscription Plan 4. Tap or click Upgrade Now.
The Subscription Plan page displays retail and business options.
5. To change to a Premier or Elite plan, tap or click SELECT under the plan.
6. To change to an Advanced, Professional, or Enterprise plan, select For Business and then tap or click SELECT under the plan 7. Follow the onscreen instructions to change your subscription.
After your payment is processed, your service level information is updated on the Subscription page.
72
8. Arlo Connect Arlo Connect is a simple way to integrate Arlo devices into other smart home platforms using standard and secure cloud integration.
Use Arlo With IFTTT
You can use the Arlo app with IFTTT (If This Then That), a free cloud-based service that connects smart home devices and applications.
To add Arlo to your IFTTT app, visit ifttt.com/arlo.
To learn more about Arlo and IFTTT, visit arlo.com/community.
Use Arlo Cameras With SmartThings You can integrate your Arlo cameras into the SmartThings app, so all your smart devices work together. For example, if your Arlo camera detects motion, SmartThings can tell your Aeon Labs Siren to trigger your alarm. For more information, see Chapter 8. Use SmartThings With Arlo Cameras on page 49
Use Arlo With Stringify Stringify is an iOS app that transforms the way you connect your life by bringing your physical and digital things together. Integrating your Arlo cameras into the Stringify app allows them to connect and interact with more than 600 smart home products and digital services. Stringify connects your smart products and services using flows that you can download, modify, or create using the Stringify app on your iOS device.
Motion, audio, or low battery notifications from Arlo cameras can be triggers for Stringify flows, or Stringify flows can instruct Arlo cameras to arm, disarm, and record video clips.
Add Arlo Cameras to the Stringify App Stringify is compatible with Arlo Wire-Free, Arlo Pro Wire-Free, Arlo Q, and Arlo Q
Plus cameras. Your camera must be in Armed mode or in a custom mode to detect motion or audio and report it to Stringify.
You can also create custom modes to detect motion or audio or both, but not record a video clip. This can be useful for advanced flows where you want to use the Arlo camera as a detection device, but not capture video unless other conditions in the flow are met. For more information about creating custom modes, see Add a Mode on page 55.
73
Arlo Connect In advanced Stringify flows, you can use the same Arlo camera twice in the same flow. For example, if your Arlo front door camera detects motion, it’s after 5 p.m., and you’re away from home, you can tell Stringify to trigger a 20-second recording from your Arlo front door camera and a 40-second recording from your Arlo driveway camera.
¾To add Arlo cameras to the Stringify app and use them in a flow: 1. Install the Arlo app, create an account, and complete the setup process.
2. Download the Stringify app from the App Store.
3. To create a free Stringify account, from the main screen of the Stringify app, select Things and tap New at the top right of the screen.
4. Scroll down to Netgear Arlo Cameras and tap the Arlo icon.
5. Tap Connect and log in with your Arlo user name and password.
6. Accept the terms and conditions.
A list of discovered cameras displays. Your Arlo cameras are now connected to your Stringify account.
7. Tap Done to return to the previous menu.
8. From the main screen, tap Flows > Create.
9. Tap the + button to add devices, including Arlo cameras, to your flow.
10. Drag from one icon to another to connect your Things.
To download pictured flows directly to the Stringify app, visit https://community.netgear.com/t5/Arlo-Knowledge-Base/What-is-Stringify-andhow-do-I-use-it-with-my-Arlo-cameras/ta-p/1160647
11. Tap each item in your flow to set its trigger or action.
12. Give your flow a name and tap Enable Flow when finished.
Visit stringify.com for more information about how to create flows and for premade example flows that include Arlo cameras.
74
9. Use SmartThings With Arlo Cameras With Samsung SmartThings, you can integrate your Arlo cameras into the SmartThings app, so all your smart devices can work together. For example, if your Arlo camera detects motion, SmartThings tells your Aeon Labs Siren to trigger your alarm.
After you integrate your Arlo Wire-Free Cameras into the SmartThings app, you must use the SmartThings app to configure your modes and rules. If you try to edit your modes and rules in the Arlo app, you will disarm the SmartThings mode. You can continue to use the Arlo app to view the library.
Note: After syncing your Arlo cameras with the SmartThings app, a SmartThings mode displays in your Arlo app. Your Arlo system must remain in the SmartThings mode for your system to work correctly with the SmartThings app. All mode configuration must be done in the SmartThings app. If you choose to no longer use the SmartThings app, delete the SmartThings mode in your Arlo app, and delete the Arlo cameras from the things menu in the SmartThings mobile app.
Prepare Arlo to Work With SmartThings Use Arlo Camera Names That Are Easy to Recognize Before integrating your cameras with the SmartThings app, make sure that the names of your cameras are easy to understand. If you choose not to rename your cameras, the camera’s serial number becomes the camera’s name in the SmartThings app.
For information about how to change the camera names, see Name Your Cameras on page 25.
Arlo camera feed integrated into the SmartThings app
Use SmartThings With Arlo Cameras 75
Disarm Your Cameras When you integrate your Arlo Wire-Free cameras with SmartThings, a new SmartThings mode is created in the Arlo app. Because SmartThings manages your Arlo cameras, they must be in Disarmed mode before you can begin the integration setup. You cannot use Schedule mode or Geofencing mode at the same time as SmartThings mode. You must also disable any IFTTT recipes that change the Arlo system mode.
¾To disarm your cameras: 1. Tap the Arlo icon on your mobile device.
If you are using a computer, enter arlo.netgear.com in the address bar of a browser.
The Cameras page displays.
2. Click or tap Mode.
A list of cameras displays.
3. Click or tap the camera.
The Mode page displays.
4. Tap Disarmed.
5. Exit the Arlo app.
Integrate Your Arlo Cameras With the SmartThings App To integrate your Arlo cameras into the SmartThings app: 1. Make sure that your cameras are disarmed in the Arlo app.
See Disarm Your Cameras on page 75.
2. Launch the SmartThings mobile app.
3. If you do not own a SmartThings account, visit https://support.smartthings.com/ hc/en-us/articles/205380634-Setting-up-an-account-the-Hub-and-Things to create an account.
4. Log in to your SmartThings app.
5. Tap Marketplace > Things > Safety and Security.
Use SmartThings With Arlo Cameras 76
6. Tap Cameras > Netgear Arlo.
7. Tap Arlo (connect).
8. Tap Connect to Arlo.
9. Enter your Arlo login credentials 10. On the bottom of the page, accept the Privacy Policy.
11. Tap Done at the upper-right corner.
12. Tap Connect to Arlo Cameras and select the cameras that you want to sync with the SmartThings app.
13. Tap Done > Next > Done.
14. Tap My Home > Things.
15. To change your camera’s settings, tap the settings icon.
Note: Repeat this step for each camera that you synced with your SmartThings app.
Your Arlo Wire-Free Cameras are in the SmartThings mode in your Arlo app.
For more information about integrating your Arlo cameras into the SmartThings app, visit https://support.smartthings.com/hc/en-us/articles/209529506-Netgear-Arlo-WireFree-Camera.
Use SmartThings With Arlo Cameras 77
Adjust the Motion Sensitivity Level When you integrate Arlo into the SmartThings app, the motion sensitivity for each camera is set to a default of 80. If your camera works more effectively at a different setting, you can use the Arlo app to change it.
¾To adjust the motion sensitivity level: 1. Tap the Arlo icon on your mobile device.
If you are using a computer, enter arlo.netgear.com in the address bar of a browser.
The Cameras page displays.
2. Click or tap Mode.
A list of cameras displays.
3. Click or tap the camera.
The Mode page displays.
4. If you are not sure what motion sensitivity level you have been using, click or tap Editnext to Armed mode.
The Edit Rule page displays.
5. Click or tap Edit next to the rule that you want to edit.
6. Under If the following, click or tap Editnext to Motion is detected.
The Motion detection settings page displays.
7. Note the motion sensitivity setting, but do not select Armed mode.
8. Return to the Mode page.
9. Click or tap Editnext to SmartThings mode.
The Edit Rule page displays.
10. Click or tap Edit next to the rule that you want to edit.
11. Under If the following, click or tap Editnext to Motion is detected.
The Motion detection settings page displays.
12. Set the motion sensitivity level to match the setting that you viewed in Step 7.
78
Adjust Push Notifications When you integrate Arlo with SmartThings, the Arlo app sends push notifications to the SmartThings app. Then the SmartThings app sends you notifications about Arlo and your other smart things. If you still receive push notifications from Arlo, on your smartphone, use your smartphone settings to turn off the Arlo notifications. Email notifications are not needed.
79
10. FAQs and Troubleshooting Battery FAQs How can I recharge the Arlo Pro battery?
Your Arlo Pro battery is fully charged when it leaves the factory. You can use the power adapter cable to plug the camera into an electrical outlet to charge the battery. You can also use the Arlo Pro Charging Station (sold separatey) to charge the battery. For uninterrupted Arlo Pro camera use, you can purchase a spare battery and the charging station. Then you can put the fully charged spare battery into the Arlo Pro camera while you recharge the battery. The charging station can recharge two batteries simultaneously.
What do I need to know about using Arlo cameras in cold weather?
Cold temperatures can affect any battery’s capacity, due to the chemistry of batteries. This means that if you install your Arlo camera outside in cold temperatures, you might notice a shorter battery duration for the camera, or a faster than expected drop in the displayed battery capacity.
Why does one Arlo camera battery drain faster than another Arlo camera battery?
Your Arlo camera is flexible and you can use it in a wide range of environments.
Your environment might include elements that affect battery life. Some of the places that you might place your Arlo camera use more battery power than others.
Note the following examples.
Arlo cameras work well in the dark. They use infrared sensors to monitor motion in the dark. These use more battery power than cameras monitoring motion in a welllit room.
Arlo cameras work well when they are as far away as 300 feet from the base station. Cameras positioned farther away from the base station use more battery power than cameras positioned close to the base station.
Arlo cameras let you choose the quality level of the videos that they record.
Cameras set to high-quality video recording use more battery power than cameras set to low-quality video recording.
Will my WiFi environment affect my Arlo camera battery?
Yes. If you are in a noisy WiFi environment, your Arlo camera battery might drain faster. Use a WiFi analyzer to test the WiFi noise in your environment.
80
FAQs and Troubleshooting What is the battery life for NETGEAR Arlo Pro rechargeable batteries?
The NETGEAR Arlo Pro camera rechargeable battery life is 4 to 6 months with normal usage and can be extended for optimal usage if you use key settings and follow certain tips. The Arlo Pro cameras offer the best battery life when set up to record when they detect motion.
How long does it take to charge the Arlo Pro rechargeable battery?
Charging an Arlo Pro rechargeable battery inserted into the camera from 0 to fully charged takes about 2.5 hours. One Arlo Pro rechargeable battery inserted into the Arlo Pro Charging Station takes about 2.74 hours to charge. Two Arlo Pro rechargeable batteries inserted into the Arlo Pro Charging Station take about 5.43
hours to charge.
How can I extend the NETGEAR Arlo Pro camera’s battery life?
To extend the battery life, follow these tips: – Check your NETGEAR Arlo Pro Wire-Free camera’s Power Management settings.
To extend your battery life, select the Best Battery Life setting. This setting trades video quality for improved battery life. For best video quality, select the Best Video setting. This setting reduces battery life but provides the highest quality images. To balance the battery life and video quality, select the Optimized setting. To access your Power Management settings, log in to your Arlo account, select Settings > Camera Settings, and select a camera.
– Normal usage is defined as four minutes of viewing or recording per day with the Arlo Pro Wire-Free Camera in the Optimized setting.
– Depending on your specific usage, you might see different results. Also note that a NETGEAR Arlo Pro Wire-Free Camera’s distance from the base station can affect its battery life.
Manage Bandwidth for Streaming Depending on the Power Management setting, the bitrate and upstream bandwidth requirement adjusts. The frame rate depends whether you are in night-vision mode or not. The default behavior for each power management setting is as follows.
Each power management setting starts with a particular bit rate and frame rate.
Day Mode – Best video. 600 kbps @ 24 fps – Optimized. 300kbps @ 24 fps – Best battery life. 200 kbps @ 24 fps
81
FAQs and Troubleshooting Night Mode – Best video. 600 kbps @ 15 fps – Optimized. 300 kbps @15 fps – Best battery life. 200 kbps @15 fps Depending on the available bandwidth and how much of the buffer is full, the Arlo Pro Wire-Free system either increases the bit rate or decreases the bit rate and frame rate.
For information about setting the resolution for your camera, see Change the Video Resolution on page 57.
Can’t See Video Streams in a Browser The Arlo web client uses the Adobe Flash plug-in to display your camera streams in a browser. Make sure that your browser is not blocking the plug-in and that you are using the latest version of Adobe Flash.
Your router might be blocking the ports to which Arlo sends data. To ensure that Arlo can stay connected, you must keep the ports 443 and 80 open on your router.
To troubleshoot problems with the video stream, check for the conditions in following sections.
WiFi Signal Interference Environments with multiple WiFi networks, WiFi devices, or frequencies can cause signal interference with your Arlo system. Minimize the number of networks, WiFi devices, and transmitted frequencies in the area where you place your base station and cameras.
Also, place your camera at least one to three feet (30 –100 centimeters) from the base station, and allow at least 6½ feet (2 meters) between cameras. Follow these guidelines to prevent WiFi signals between the devices from interfering with each other.
Out of Range Make sure that your wire-free camera is no farther than 300 feet (90 meters) from the base station. The range might be less if metal objects or thick walls and ceilings are between a camera and the base station.
Make sure that your cameras display three or four bars of signal strength in the area where you intend to install them. The cameras can work when signal strength is at one or two bars, but they might go out of range intermittently due
82
to fluctuations in the environment.
Low Battery Recharge or change the battery in the Arlo Pro camera to make sure that the battery level is no less than two bars. A low battery can cause the camera to stream intermittently.
Not Receiving Push Notifications You must be logged in to the Arlo app to receive Arlo alerts on your smartphone or mobile device. Arlo registers your device for push notification when you log in. If you used the logout option instead of simply exiting the app, you must log back in to the app. You receive Arlo alerts even if your device is sleeping.
If you did all of the following and are still not getting Arlo alerts, contact NETGEAR
support.
Check the Rules Settings for Armed Modes Check the rules in your modes. Make sure that Push Notification is enabled in the Armed mode or in a custom mode if you created one.
¾To check push notification in the Armed mode setting: 1. Tap the Arlo icon on your mobile device.
If you are using a computer, enter arlo.netgear.com in the address bar of a browser.
The Devices page displays.
2. Tap or click the Mode button.
A list of cameras displays.
3. Select the camera.
A list of modes displays.
4. Tap or click the Edit iconnext to Armed.
The Edit Rule page displays.
5. Under Alert, make sure that the Push Notification check box is selected.
6. If you made changes, tap or click Save.
83
Your settings are saved.
Check the Arlo App Settings on an iOS Device Make sure that you allow the Arlo app to receive push notifications. The Arlo app push notifications can be disabled on iOS and Android devices.
¾To allow Arlo push notifications on iOS devices: 1. Tap the Settings icon for your iOS device.
2. Tap Notifications > Arlo.
The Arlo notification settings display.
3. Make sure that Allow Notification is selected.
4. If you made changes, tap Save.
Your settings are saved.
Check the Arlo App Settings on an Android Device ¾To allow Arlo push notifications on Android devices: 1. Tap the Settings icon for your Android device.
2. Tap Application Manager > Arlo.
The Arlo notification settings display.
3. Make sure that the Show Notifications setting is enabled.
4. If you made changes, tap Save.
Your settings are saved.
If You Said No to Push Notifications at Installation When you install the Arlo app for the first time, to receive alerts, you must select Allow when asked if you want Arlo to send you push notifications. For iOS apps, after you respond to this alert, it is not presented again unless the device is restored or the app is uninstalled for at least a day.
If you said no on an iOS device, uninstall the app, wait for a day, and then reinstall it, and allow notifications. If you do not want to wait a day before you reinstall the app, you can use the system clock on your device to simulate a day.
Set the system clock forward a day or more, turn your device off, and then turn
84
the device back on. After you reinstall the app, return the system clock to the correct setting.
Verify That the Arlo Base Station Is Online To determine whether your base station is online, check the Internet LED on the front of the base station: – If the Internet LED is solid green, the base station is connected to the Internet.
– If the Internet LED is amber, the base station is not connected to the Internet.
If you are not at the same location as your Arlo base station, log in to your Arlo account: – If you can review the video feed from each of your Arlo Wire-Free Cameras, your base station is connected to the Internet.
– If you see an error message (such as “Base Station Offline” or something similar) instead of video feed, your base station is not connected to the Internet.
Base Station Is Offline If you are not sure whether the base station is offline, see Verify That the Arlo Base Station Is Online on page 84.
¾To troubleshoot the base station Internet connection: 1. Check the Ethernet cable.
Make sure that it’s securely connected to the back of your base station and to your router. Also make sure that you’re using the Ethernet cable that came with your system.
2. Check the power adapter.
Make sure that the power adapter is securely connected to the back of your base station and securely plugged into an outlet.
3. Try to connect to the Internet from another device that is connected directly to your router.
Be sure to try an Ethernet-connected device, not a device that is connected using WiFi (you can turn WiFi off on the device to ensure that the device is connecting via the Ethernet cable). Make sure that you can browse the Internet from this device by doing the following: – If you cannot browse the Internet from this device, you must restore your
85
FAQs and Troubleshooting router’s connection to the Internet.
– If you can browse the Internet from this device, continue troubleshooting.
4. Power cycle your base station.
Unplug the power adapter from the outlet, wait one minute, and reconnect the power adapter to the outlet. The base station takes one to two minutes to start. When the Power LED and Internet LED light solid green, your base station is connected to the Internet. If the Internet LED is amber, continue troubleshooting.
5. Check your router’s DHCP settings and client list.
Ensure that DHCP is enabled and that router’s DCHP client list supplied an IP
address to the base station. (If it did, the base station appears in the client list.) For more information, see your router documentation.
6. If you were previously able to connect your base station to the Internet but now cannot connect, check the router’s security settings and firmware to ensure that no changes were made since the last time it successfully connected.
You might want to temporarily lower the security settings on the router or temporarily place the base station in the DMZ to rule out any firewall restrictions. If you make these changes, power cycle your base station as described in Step 4.
7. Check to make sure that ports 443 and 80 are open on your router.
Note: If you do not manage your Internet environment, contact your IT
department for assistance with any firewall or router configurations. The Arlo base station cannot connect through most proxy servers. Check with your IT team and Internet service provider (ISP) about ways to bypass any proxy servers. Ask your IT team to ensure that ports 443 and 80 are open.
8. Perform a factory reset on your base station.
For more information, see Reset the Arlo Base Station to Factory Settings on page 87.
If you are still unable to get your base station to connect, visit support.arlo.com and submit a support case describing the steps you took and provide the following information: – Base station serial number
86
– User name (email address used to register Arlo account) – Internet service provider (ISP) name – Internet connection type (DSL, cable, and so on) and speed (Arlo requires at least 1 Mbps upstream) – Internet router model – List of other devices connected directly to your router – The last time and place that your base station successfully connected to the Internet Signal Strength If an Arlo Pro Wire-Free camera’s signal to the base station is weak, recording delays might occur when motion is detected.
To test whether the camera signal is strong enough, check the camera LED on the base station; if it’s blinking amber, the base station detects a low data rate, which means that a camera is too far from the base station.
Follow these tips to increase signal strength: – Position your base station so that it is central to all of your cameras.
– Position your camera a maximum of 300 feet (90 meters) from the base station.
The maximum line-of-sight range of 300 feet is reduced by each wall, ceiling, or other large obstruction between the camera and base station. The following materials reduce signal strength the most: – Unusually thick walls and ceilings – Brick – Concrete – Stone – Ceramic – Glass, especially mirrors – Metal – Large quantities of water, such as the water in a fish tank or water heater – Mount your cameras away from devices such as cordless phone bases, baby monitors, and microwave ovens.
87
– Do not place your Arlo system near multiple WiFi routers. Other WiFi-enabled devices can interfere with Arlo’s wireless signal.
Reset the Arlo Base Station to Factory Settings Performing a factory reset returns your base station values to the default settings. It also removes the serial number from your Arlo account.
¾To perform a factory reset on your base station: 1. Use a straightened paper clip to press and hold the Reset button on the back of the base station for about 10 seconds.
When the base station reset completes, the LEDs on the front of the base station blink amber. When the LEDs stop blinking amber, your base station reboots. The base station is removed from your Arlo account.
2. When the Power and Internet LEDs both light solid green, tap the Arlo icon on your mobile device and log in to your Arlo account.
If you are using a computer, enter netgear.com in the address bar of a browser.
3. Tap or click New to Arlo?.
4. Follow the setup instructions.
If your Arlo cameras were synced to the base station, you might need to sync the cameras to the base station again. For more information, see Use the Arlo App to Set Up an Account on page 11.
88
11. Rechargeable Battery Safety Safety Rules for Arlo Pro Rechargeable Batteries Arlo Pro Wire-Free HD Security Cameras use rechargeable batteries and can go wherever you need them. But ALL batteries can EXPLODE, CATCH FIRE, and CAUSE
BURNS if disassembled, punctured, cut, crushed, short-circuited, incinerated, or exposed to water, fire, or high temperatures, so you need to handle them with care.
To use Arlo Pro rechargeable batteries safely, follow these guidelines: – ALWAYS store spare batteries in a cool, dry, ventilated area.
– ALWAYS make sure that the battery compartment is clean and free of any debris before inserting new batteries.
– ALWAYS make sure the battery contacts are aligned.
– ALWAYS keep all batteries away from children.
– ALWAYS follow local waste and recycling laws when throwing used batteries away.
– ALWAYS use an Arlo Pro power adapter or an Arlo Pro Charging Station (sold separately) to charge Arlo Pro rechargeable batteries.
– NEVER place Arlo Pro rechargeable batteries in a pocket, purse, or other receptacle, especially those containing metal objects.
– NEVER store Arlo Pro rechargeable batteries with hazardous or combustible materials.
– NEVER let an Arlo Pro rechargeable battery or battery compartment get wet—before, during, or after installation. (Remember your camera itself is weatherproof, but its interior battery compartment and batteries aren’t).
– NEVER disassemble, cut, crush, puncture, short-circuit, dispose of in fire or water, or expose your Arlo Pro rechargeable battery to temperatures above 60°C (140°F).
89
Rechargeable Battery Safety Safety Rules for Arlo Pro Charging Station The Arlo Pro Charging Station is sold separately. You can use the charging station to charge one or two Arlo Pro rechargeable batteries. For more information about the Arlo Pro Charging Station, see the instructions that are included in the Arlo Pro Charging Station package.
When using the Arlo Pro Charging Station, follow these guidelines to avoid personal injury and property damage from, but not limited to, the risk of electric shock or fire: – Charge only Arlo Pro Rechargeable Batteries compatible with the Arlo Pro Charging Station. Charging other batteries may cause them to leak, rupture, or explode.
– Use the charger only in dry locations. Keep away from rain, snow, or excessive moisture.
– Do not operate the charging station if it or its cord is damaged.
– Do not disassemble, modify, or attempt to use the charging station as a power source.
– Do not disassemble the battery, dispose of the battery in fire, put the battery in backward, mix it with used or other battery types, or short circuit the battery.
The battery might ignite, explode, leak, or get hot, causing injury.